Ingredients
Date sugar (date powder) for food manufacturers
Date sugar, also sold as date powder, is made from pitted Tunisian dates that are dried and then milled: it is not a refined sugar and it does not dissolve like sucrose. For a manufacturer, a lot is judged on its technical sheet: composition, moisture, particle size, colour, caking behaviour, microbiology and foreign matter.
Date sugar appeals to brands that want to sweeten with a fruit rather than with sucrose. On a production line, though, it behaves like a fruit powder, not like a sugar: it picks up moisture from the air, colours the recipe and leaves a deposit in a drink. This page covers what the product is, what it changes in a formulation, what to demand in writing and how to run trials. For the overview, see date ingredients.
What exactly is date sugar?
"Date sugar" and "date powder" are, in practice, two names for the same product: pitted dates, dried until they can be ground, then milled and sieved. Nothing is extracted and nothing is crystallised. The powder keeps all the dry matter of the fruit, including its insoluble part (fibrous pulp and skin). That is what sets it apart from refined sugar, and it is why it does not dissolve the way sucrose does, whether in water or in a dough.
Some powders receive a drying carrier or an anti-caking agent so that they stay free-flowing; research on date powder looks at exactly these additions, maltodextrin among them, to obtain a powder that remains stable at room temperature (Rafiee Darsangi et al., 2020). A powder made of dates alone and a powder with a carrier are not labelled the same way, so if your specification rules out any addition, say so in the quotation request.
Which dates go into the powder?
The raw material comes from the oases of the Djerid, the Nefzaoua and the Gabes region, harvested from October to December. In 2023 Tunisia was the world's fifth-largest date exporter by value, at 256.7 million US dollars (WITS, HS 080410). Deglet Nour, with its amber, semi-soft flesh, dominates those exports; Allig, Khouat Allig and Kenta, firmer and sometimes darker, change the colour and taste of a powder.
The product starts from pitted fruit: as with pitted dates, pit fragments are the first thing to check on arrival. Variety and harvest are stated on the technical sheet of the lot.
How does it behave in a formulation?
| Behaviour | What happens | What to plan for |
|---|---|---|
| Dissolving | The soluble part dissolves; the insoluble part stays in suspension, then settles | In drinks: stirring, a stabiliser, or date syrup for a clear product |
| Caking and flow | Hygroscopic powder: it absorbs ambient moisture, forms lumps and flows poorly through a hopper or screw feeder | Closed packaging, dry production area, sieving before dosing, a trial on your own feeder |
| Colour | Beige to brown depending on variety, drying and grind; the finished product turns darker | Colour tolerance in the specification, baking trials |
| Particle size | Fine: quick dispersion, smooth texture; coarse: visible specks, a slight grainy feel | Particle-size distribution and sieving method on the sheet |
| Taste and sweetness | Different from sucrose, with a fruity note | Substitution level set by trials, never weight for weight by default |
Date sugar also does not perform every technical function of sucrose: structure in a sponge, air incorporation during creaming, a role in preservation. If your recipe depends on these, start with a partial substitution and raise the share of powder from one trial to the next, measuring texture, colour and shelf life each time.
What should you demand on the technical sheet?
No value is announced here: everything is "as stated on the technical sheet of the lot", together with its measuring method. This is the list to request before the first trial:
| Parameter | What to ask for | Why it matters |
|---|---|---|
| Composition | Dates only, or additions (drying carrier, anti-caking agent); variety or varieties and harvest | Ingredient list and claims of your product |
| Moisture and water activity | Values for the lot and method | Caking, shelf life, microbial risk |
| Particle size | Distribution, sieves used, method | Dispersion, texture, feeder settings |
| Colour | Measuring method or agreed visual reference | Consistent shade of the finished product |
| Sugar content | Value for the lot and method | Adjusting sweetness, nutrition labelling |
| Foreign matter | Pit fragments, metal, insects; sieving, detection | Consumer safety, line stoppages |
| Microbiology | Yeasts, moulds, total count, pathogens according to your specification | Compliance with your food safety plan |
| Contaminants | Mycotoxins, pesticide residues against the limits of your market | Regulatory compliance |
| Allergens | Declaration and cross-contact risk on the line | Labelling |
| Shelf life and storage | Duration, temperature, humidity conditions, packaging type | Stock management |
Storage: keeping the powder from setting solid
A fruit powder fears moisture above all. Keep bags closed, in a dry, temperate store, on pallets rather than on the floor, and reseal opened bags. Goods that come out of cold storage should reach the temperature of the production area before they are opened; otherwise moisture from the air condenses on the powder and triggers caking. First in, first out.
Soft lumps usually break up on sieving; a hard, set block points to moisture pick-up whose cause must be traced with the supplier (packaging, transport, storage). Exact shelf life and storage conditions are on the technical sheet of the lot.
Packaging, transport and customs
Date sugar is delivered in bags or cartons, palletised. The type of packaging (inner liner, moisture barrier) determines how well the powder resists caking, so formats, units per pallet and transport are confirmed in the quotation. To estimate how a container fills, use the container loading simulator; for your landed cost, the export cost calculator.
On the customs side, a powder made from Chapter 8 fruit, the chapter that covers dates, may fall under Harmonized System subheading 1106 30 (flour, meal and powder of the products of Chapter 8) rather than 0804 10. The exact classification depends on the composition: confirm it with your freight forwarder or, in the European Union, through Binding Tariff Information from customs. Duties are read in your country's official tariff (TARIC for the EU) on the date of your order. The documents required for a processed product may also differ from those for whole dates (phytosanitary rules and disinfestation): confirm them with your forwarder.
Which industrial uses?
Bakery and biscuits. Date sugar replaces part of the sugar in biscuits, cookies and speciality breads; it darkens crumb and crust, binds some water and changes spread. Baking trials are essential.
Bars and dry blends. The powder is mixed dry with the other particles; it binds nothing. The binder comes from elsewhere, often date paste or syrup.
Breakfast cereals and granola. In granola clusters the powder follows the binder; as a dusting it adheres poorly without moisture or a coating.
Drinks. Smoothies, plant-based drinks, powdered mixes to reconstitute: the insoluble part settles, which calls for a stabiliser or acceptance of a deposit.
"No added sugars" products. This claim is governed by Regulation (EC) No 1924/2006. Under its Annex, it may only be made where the product contains no added mono- or disaccharides and no other food used for its sweetening properties; where sugars are naturally present, the label should also state "contains naturally occurring sugars". Date sugar added to sweeten a recipe falls, in principle, into that second category, so we cannot tell you that any claim is permitted. Have your regulatory team validate the name, ingredient list and claims before the pack is frozen.
Sample and first quotation
To request a quotation, state the application, the target particle size, the annual volume you have in mind, the destination country, your preferred Incoterm and your requirements (no additions, analyses, organic). The dated quotation arrives within 24 to 48 hours with the technical sheet of the proposed lot; the minimum order quantity is stated in it. Samples are paid: the price and shipping cost are given in the quotation before dispatch. Ask for the sample from the proposed lot, in a quantity large enough for a pilot trial.
Market figures come from the sources listed, as of their publication date. They change over time: confirm them when you request a quotation.
Sources
- UN Comtrade / WITS, dates (HS 080410), exports 2023
- European Commission, permitted nutrition claims (Annex to Regulation (EC) No 1924/2006), consulted November 2026
- Harmonized System, subheading 1106 30 (powders of the products of Chapter 8), UK Integrated Online Tariff, consulted November 2026
- Rafiee Darsangi, Badii, Salehifar, 'Optimization of the production of a self-stable powder from date fruit variety Shahani', Agriculturae Conspectus Scientificus, vol. 85, no. 3, 2020
Frequently asked questions
Are date sugar and date powder the same product?
In practice, yes: both names describe pitted dates that are dried, milled and sieved. The difference lies in the composition, since some powders contain a drying carrier or an anti-caking agent while others contain dates only. The trade name tells you little; the composition stated on the technical sheet of the lot is what counts.
Does date sugar dissolve in water or in a drink?
Not completely. The fruit's sugars go into solution, but the insoluble part (fibrous pulp and skin) stays in suspension and then settles at the bottom. In a drink you therefore need stirring, a stabiliser or a product that accepts a deposit. For a clear product, filtered date syrup is a better fit than the powder.
Can date sugar replace white sugar weight for weight?
Nothing guarantees it. Sweetness, colour, water binding and baking behaviour differ from sucrose, and date sugar does not perform all of its functions, such as aeration during creaming or structure. Start with a partial substitution, then raise the share of powder from one trial to the next while measuring texture, colour and shelf life.
Why does date powder form lumps, and how can you prevent it?
It is hygroscopic: exposed to humid air, it absorbs water and clumps together. Keep bags closed in a dry store, let cold goods reach room temperature before opening, reseal opened bags and sieve before dosing. If caking persists, ask whether the lot contains an anti-caking agent, bearing in mind that it would then appear on your label.
Which particle size suits my application?
A fine powder disperses quickly and gives a smooth texture, which helps in powdered drink mixes or fillings. A coarser grind leaves visible specks and a slight grainy feel, which some biscuits look for. Ask for the particle-size distribution of the lot and the sieving method, then write your tolerances into the specification.
Does date sugar contain a carrier or an anti-caking agent?
That depends on the process and on the lot. Some powders are made of dates alone; others receive a drying carrier or an anti-caking agent to stay free-flowing. The technical sheet of the lot gives the exact composition. If your specification rules out any addition, state it in the quotation request so that lot selection takes it into account.
Can I print "no added sugars" on a product sweetened with date sugar?
Under the Annex to Regulation (EC) No 1924/2006, this claim requires that no mono- or disaccharides and no other food used for its sweetening properties have been added. Date sugar used to sweeten falls, in principle, into that case. We do not promise any claim: have your label checked by your regulatory team before printing.
Under which customs code is date sugar declared?
A powder made from Chapter 8 fruit may fall under HS subheading 1106 30 rather than 0804 10 for whole dates, but the classification depends on the exact composition of the product. Confirm it with your freight forwarder; in the European Union, Binding Tariff Information can be requested. Duties are read in the official tariff on the date of the order.
How should date sugar be stored in the plant?
In a dry, temperate store, with bags closed, on pallets rather than the floor, away from heat and steam. Goods coming out of cold storage must reach room temperature before opening to avoid condensation. Apply first in, first out. Shelf life and exact storage conditions are given on the technical sheet of the lot.
What colour will my finished product be?
Darker than with white sugar, in beige to brown shades. It depends on the variety, the drying and the fineness of the powder, then on your own process, since baking darkens it further. Run your trials with a sample of the proposed lot and write a colour tolerance, with its control method, into the specification.
Does date sugar work in bars and cereals?
Yes, as a sweetening ingredient in the dry phase. It does not act as a binder: in a bar or a granola cluster, cohesion comes from a paste, a syrup or another binder. As a dusting, it sticks poorly without moisture or a coating. Plan ageing trials, because a powder can cake inside packaging that lets moisture in.
What should I specify to receive a date sugar sample suited to my trials?
State the application, the target particle size, the quantity needed for a pilot trial and your critical parameters (no additions, colour, microbiology). Samples are paid: the price and shipping cost appear in the quotation before dispatch. Ask for the sample from the lot whose technical sheet you receive, so that the trial reflects production.
Request your dated quotation
Tell us your product, destination and schedule: we reply within 24 to 48 hours with a dated quotation, a specification sheet and, if needed, a paid sample.
No commitment. Reply within 24 to 48 working hours.