Ingredients
Tunisian date paste for the food industry
Our date paste is made from pitted Tunisian dates, Deglet Nour first, ground and packed in blocks of roughly 5 to 10 kg. For a manufacturer, a lot is judged on its technical sheet: Brix, moisture, pH, foreign matter, microbiology, allergens and heat treatment, as stated on the technical sheet of the lot.
On a market where date paste is first sold on price and colour, it is the quiet lines of the technical sheet that decide whether an industrial trial succeeds. This page describes a paste of Tunisian origin the way a manufacturer's buyer should question it: what it contains, how it is packed, what to demand in writing and how to run trials. For the overview of ingredients (syrup, sugar, dice), see the date ingredients hub.
Where does the paste come from, and which varieties?
Date paste is a processed fruit: dates sorted and pitted, then ground and kneaded into a uniform mass that is packed in blocks. In Tunisia the raw material comes from the oases of the Djerid (Tozeur, Nefta, Degache), from the Nefzaoua (Kebili, Douz) and from the Gabes region. Harvest takes place from October to December.
Deglet Nour, with its amber, semi-soft flesh, is the dominant variety in Tunisian exports. It gives a light to amber paste with a fairly mild honey taste. Allig, Khouat Allig and Kenta, other Tunisian varieties that are firmer and sometimes darker, change the colour, the hold and the raw-material positioning of a formula. The variety, or the blend of varieties, is stated on the technical sheet of the lot; if your recipe requires a single variety, say so in the quotation request.
In the trade, paste is often made from sound fruit that was not selected for tray packs because of appearance or size. That is not a defect in itself, but ask for each lot which starting category was used and which sorting criteria applied.
From date to block: the steps that touch your formulation
| Step | What it changes for you |
|---|---|
| Sorting and washing | Starting cleanliness, absence of damaged or fermented fruit |
| Pitting | Risk of pit fragments in the paste, the first reception criterion |
| Heat treatment, if any | Microbiology, colour, cooked note |
| Grinding and kneading | Smooth or fibrous texture, exit temperature |
| Foreign-matter control | Sieving, magnets, metal detection depending on line equipment |
| Packing in blocks | Food-grade liner inside a carton, sealing, block weight |
Production lines differ from one site to another. The detail of the steps actually applied to a lot is given on its technical sheet, not on this page.
What should you demand on the technical sheet?
No figure is announced here: everything is "as stated on the technical sheet of the lot". This is the list to request before any trial.
| Parameter | What to ask for | Why it is decisive |
|---|---|---|
| Composition | Dates only, or any additions (surface oil, preservative); variety or varieties and harvest | Label and claims of your finished product |
| Brix | Value for the lot and measuring method | Sweetening power, recipe adjustment |
| Moisture and water activity | Values for the lot and method | Texture, storage behaviour, microbial risk |
| pH | Value for the lot | Stability and compatibility with the rest of the formula |
| Foreign matter | Pit fragments, metal, glass, plastic, insects; control means on the line | Consumer safety, production stoppages |
| Microbiology | Yeasts, moulds, total count, pathogens tested according to your specification | Compliance with your food safety plan |
| Contaminants | Mycotoxins, pesticide residues, analysis of the lot against the limits of your market | Regulatory compliance, essential for infant food |
| Allergens | Declaration and cross-contact risk on the line | Labelling of your finished product |
| Heat treatment | Type and conditions applied | Microbiology and flavour profile |
| Shelf life and storage | Duration, storage temperature, transport conditions | Planning of your supplies |
"Value for the lot" means the measured result with its method, not a catalogue range. Two sheets can only be compared if they measure the same thing in the same way.
Blocks, transport and storage
Paste travels in blocks of roughly 5 to 10 kg, in a food-grade liner, in palletised cartons; the formats retained are confirmed in the quotation. The cold chain recommended for dates (refrigerated container, 0 to 4 °C) is the starting point for paste, and the lot sheet states the storage temperature and shelf life. To estimate how a container fills, use the container loading simulator; for your landed cost, the export cost calculator.
Export documents depend on the product and the destination country (phytosanitary certificate, certificate of origin or EUR.1 depending on agreements). The page on phytosanitary rules and disinfestation describes the logic for dates; for a paste, confirm the required documents with your freight forwarder, together with the customs classification, which may differ from that of fresh or dried dates (HS 080410) and should be checked on the date of your order.
How should you run formulation trials?
A good result with a showcase sample proves nothing about production. Work in stages:
- Decide what you are testing: texture in the bar, behaviour of a filling in the oven, colour of the finished product, taste.
- Ask for a sample from the lot whose technical sheet you receive, in the delivery format: a block, not a demonstration jar.
- Run a pilot trial with your real recipe, then an ageing trial. A paste can behave well the next day and drift (hardness, moisture) by the end of the targeted shelf life.
- Repeat with a second lot, preferably from another production date, to measure variability.
- Write the acceptable parameters into the contractual specification, with tolerances and analytical methods.
Which paste for which use?
For bars, viscosity and kneading temperature matter as much as Brix: a paste that is too soft sticks to tools, one that is too firm disperses poorly. In bakery and pastry you look at hold in the oven, moisture migration between filling and dough, and colour after baking. In infant food the manufacturer's own specification is the reference: a paste is considered suitable only after analyses of the lot for residues and contaminants. An organic lot is presented as such only with its certificate; the organic dates page explains what that involves.
Sample and first quotation
To request a quotation, state the application, the annual volume you have in mind, the destination country, the Incoterm you prefer and any special requirements (organic, allergens, analyses). The dated quotation arrives within 24 to 48 hours with the technical sheet of the proposed lot; the minimum order quantity is stated in it. If your project also involves whole fruit without pits, look at the pitted dates.
Market figures come from the sources listed, as of their publication date. They change over time: confirm them when you request a quotation.
Frequently asked questions
How is date paste made, and from which varieties?
Dates are sorted, pitted, possibly heat-treated, then ground and kneaded into a uniform mass packed in blocks. Deglet Nour dominates Tunisian exports; Allig, Khouat Allig and Kenta also exist. The variety or varieties of each lot are shown on its technical sheet.
What are the Brix and moisture levels of the paste?
We announce no general value: Brix and moisture change with the variety, the harvest and the processing, and are given "as stated on the technical sheet of the lot". That sheet, with the measuring method, is the contractual reference. Ask for it with the quotation and compare it with your specification.
Which packaging formats are offered?
Paste is packed in blocks of roughly 5 to 10 kg, in a food-grade liner inside a carton, on pallets. The formats retained, the number of cartons per pallet and the transport mode are confirmed in the quotation. The container loading simulator lets you estimate the load of a container before you decide.
Is date paste suitable for energy bars?
Yes, it is one of its most common applications: it binds the ingredients and carries most of the sweetening power. Watch viscosity, kneading temperature and water content, which drive the texture and shelf life of the bar. A pilot trial on your own line remains indispensable.
Can it be used in bakery and pastry as a filling?
Yes, with baking trials. The points to check are how the filling holds in the oven, moisture migration into the neighbouring dough, which shortens shelf life, and colour after baking. State your process (temperature, time, presence of a glaze) in the request to help select the lot.
Is there an organic version of the date paste?
Availability is checked lot by lot. The lot certificate comes with the quotation when one exists, and without a certificate the product is not presented as organic. If your market requires organic, say so in the first request so that lot selection takes it into account.
How long can date paste be kept?
It depends on the lot, the heat treatment, the water activity, the packaging and the storage temperature, so it is stated on the technical sheet of the lot together with storage conditions. Cold generally extends the shelf life of a date-based product. Plan your supplies around that stated shelf life.
What is the minimum order quantity?
It is stated in the quotation, because it depends on the format, the transport mode and the point in the harvest campaign. It applies to a firm order; for a formulation trial you start with a sample, whose terms are agreed when you request it.
Do you supply a sample for industrial formulation trials?
Yes, on request. State the application, the format you want and your critical parameters. Ask for a sample from the lot whose technical sheet you receive, so that the trial reflects production. Test at least two lots before freezing your specification.
Which technical documents do you provide?
The quotation comes with the technical sheet of the lot: composition, physico-chemical parameters, microbiological criteria, foreign matter, allergens, heat treatment and storage conditions. Analyses and certificates (organic, quality systems, halal, kosher) are attached when they exist. If you have a supplier questionnaire template, send it over.
How can the risk of pit fragments be limited?
Mechanical pitting is never perfect. Ask how the line controls fragments (sieving, detection), how often it checks and how non-conformities are handled. Plan an incoming check on your site and, if your end product justifies it, a further sieving or detection step before your own packing.
What is the difference between date paste, syrup and pitted dates?
Paste is the whole fruit ground with its fibre; syrup is the concentrated extract of the date's sugars, liquid and fibre-free; pitted dates are whole fruit without the stone and without grinding. The choice depends on the texture you want and the role of the ingredient in your recipe.
Request your dated quotation
Tell us your product, destination and schedule: we reply within 24 to 48 hours with a dated quotation, a specification sheet and the option of a sample.
No commitment. Reply within 24 to 48 working hours.