Tools

Container Load Simulator: Cartons of Dates per Reefer

This simulator estimates how many cartons of dates fit on a pallet, how many pallets fit in a 20', 40' or 40' High Cube reefer container, and how many tonnes that represents. You enter the carton dimensions and net weight: the result is an indicative geometric calculation, to be confirmed against the real load plan.

Updated November 13, 2026 3 min read

Carton

Pallet

40' frigorifique

2,944 total cartons

Cartons per layer
8
Layers
16
Cartons per pallet
128
Pallets on the floor
23
Pallets loaded
23
Gross weight
15,295 kg
Net weight
14,720 kg
Indicative payload
29,000 kg

Limited by available space.

Usual internal dimensions of reefer containers and example carton formats: replace them with your actual values and your shipping line's data sheet.

What is the simulator for?

It lets you size an order before requesting a quotation. Needs are often expressed in tonnes, while an exporter thinks in cartons, pallets and containers. The simulator bridges the two: it tells you what a container really holds for a given format, compares a 5 kg carton with a 10 kg carton, and flags whether volume or payload limits the load. It also helps explain why a minimum order is stated in pallets or containers rather than in kilos.

How do you use it, step by step?

  1. Choose the reefer container: 20', 40' or 40' High Cube. The interior dimensions used are market standards; they vary slightly with the shipping line and the cooling unit.
  2. Enter the carton format: outer length, width and height, and net weight. The usual formats for natural bulk dates are 5 kg and 10 kg cartons; use the dimensions of the packaging validated by your supplier.
  3. Choose the pallet: EUR 120 × 80 cm, or custom dimensions.
  4. Set the maximum pallet height, load included. It depends on the container, on the space to leave for air circulation and on handling constraints at your end.
  5. Read the result.

How should you read the result?

ResultWhat it represents
Cartons per palletCartons per layer, multiplied by the number of layers possible under the maximum height
Pallets per containerNumber of pallet footprints that fit on the floor of the chosen container
Cartons per containerCartons per pallet multiplied by the number of pallets
Tonnes per containerNumber of cartons multiplied by the net weight of one carton
PayloadComparison of the loaded weight with the container's payload

All figures are rounded down to a whole number: you cannot cut a carton, or place half a pallet. Depending on the format and the pallet height, it is sometimes volume and sometimes payload that limits first; the payload check tells you which. If the weight is exceeded, reduce the pallet height or the number of pallets, even if that leaves empty space.

What are the limits of the calculation?

The simulator does geometry: it arranges rectangular boxes on a platform, then platforms in a box. Reality adds constraints it does not know. A reefer container requires cold air to circulate around and above the pallets, and its interior volume is smaller than that of a dry container, because of the cooling unit and the floor. Carton strength limits stacking height. The net weight entered includes neither carton, nor pallet, nor film: keep a margin on the payload. Finally, the road weight limit in the destination country can be lower than the container payload; your forwarder knows it.

The real load plan therefore depends on the packing validated with the exporter. The simulator's result is for placing a quantified assumption in your quotation request, not for replacing that plan. To move from loading to cost price, use the export cost calculator next.

Frequently asked questions

Does the simulator work for 20' and 40' containers?

Yes. You choose between a 20', a 40' or a 40' High Cube reefer container. Each type has its standard interior dimensions, used to count pallets and the available height. They can differ slightly from your shipping line's: ask for them before fixing a quantity.

Does the calculation take the carton format into account (5 kg, 10 kg)?

Yes, it is in fact its main input. You enter the outer dimensions and the net weight of the carton, for example those of a 5 kg or a 10 kg carton. The simulator derives the number of cartons per layer, per pallet and per container. Any other format, even an unusual one, is simulated the same way.

Is the maximum permitted weight per container taken into account?

Yes, through a payload check: the loaded weight is compared with the container's payload. The net weight entered does not include packaging, pallet or film, so keep a margin. The road weight limit in the destination country may also be lower: confirm it with your forwarder.

Does the simulator also work for date paste in blocks?

It calculates for any rectangular carton, so also for paste blocks packed in cartons: enter the carton dimensions and the net weight. It says nothing, however, about the constraints specific to that product, such as transport temperature or how the blocks hold up; these are settled with the supplier.

Does the calculation include palletisation?

Yes. You choose a EUR pallet of 120 × 80 cm or enter the dimensions of another pallet, then a maximum height. The simulator derives the cartons per layer and per pallet, then the number of pallets the container can take, before the weight check.

Can I mix several products in the same container?

The simulator handles one format at a time. A mixed load, with several formats or products, needs a load plan drawn up with the exporter and the forwarder, notably to distribute weights. You can simulate each format separately to get an order of magnitude of what each would occupy.

Is the result guaranteed or indicative?

Indicative. The simulator applies geometry and a weight check, not a lashing plan or a loading commitment. The real result depends on the validated packing, the pallet used, the air circulation required and the carrier's instructions. Have the plan validated before booking.

Does a reefer container have a different capacity from a dry container?

Generally yes: the cooling unit and the technical floor reduce the usable interior volume compared with a dry container of the same length. That is why the simulator covers reefer containers, recommended for dates at 0 to 4 °C. Check the exact dimensions with the shipping line.

Why do the pallets not fill the whole container?

Because space must be left for air circulation, and because a pallet footprint does not always fit perfectly across the interior width and length. Pallet height is also limited, load included. Part of the volume will therefore stay empty, even on a well-prepared load.

Can I receive the calculation details by email?

Where the page offers it, you can receive the result by email. You can also copy inputs and outputs into your quotation request, which lets the exporter compare them with its load plan. See the privacy page for how data entered is processed.

Can I request a quotation directly after the simulation?

Yes. State the format, the container envisaged and the number of pallets obtained in your quotation request. The reply is a dated quotation within 24 to 48 hours, with the load plan that the exporter confirms or adjusts. Also give the destination and the shelf date you are aiming for.

Should I choose a EUR pallet or a custom pallet?

The EUR pallet of 120 × 80 cm is the most common in Europe and suits loading well. A custom pallet makes sense if your market or warehouse requires another. Whichever you choose, decide it with the exporter at the quotation stage, because it changes the load plan.

Request your dated quotation

Tell us your product, destination and schedule: we reply within 24 to 48 hours with a dated quotation, a specification sheet and the option of a sample.

No commitment. Reply within 24 to 48 working hours.